JG - Acetal and Polypropylene Valves

Plumbing & Pumps & Valves

Boat Accessories - Plumbing and Pumps

JG (John Guest) Speedfit is the easy to use, plastic push-fit system suitable for the plumbing of hot and cold water services and heating for a variety of applications include marine use.

JG. - innovation and quality - Valves

Contacts, web/source:

www.johnguest.com

Products range:

Plumbing Fittings
Brass Fittings
Flexi Hoses
Pipe & Accessories
Cold Water Services
Underfloor Heating

Accessories

Valves John-Guest offer push-fit valves in both types acetal and polypropylene for a variety of applications include marine/boat use.

Acetal

Shut-Off

Valves

John Guest offer shut-off valves have a brand new full bore mechanism for Soft Drinks industries and for potable water.

and can be used to a maximum temperature of 50C and the valve should be installed in accordance with The British Beer and Pub Association Code of Practice.

The range of Valves includes short and long handles to operate a 1/4 turn "on/off" action.

Also the valves are available with or without mounting clip.

Valve Series:

SHUT OFF VALVE - Short and LongHandle, with mounting clip with long or short Handle
MOUNTING CLIP VALVE

Polypropylene

Shut-Off

Valves

The Polypropylene Valves are more chemically resistant than acetal and we offer a range of shut-off valves is produced in polypropylene and parts are fitted with EPDM seals.

For use with other potable liquids please refer to our Customer Services Department for guidance. The valves are for use with potable water.

Valve Series:

SPEEDFIT TO SPEEDFIT CONNECTOR, FEMALE NPTF ADAPTOR and MALE NPTF ADAPTOR

Check

Valves

Check VALVE - single Imperial Series

Produced in the Drinks Dispense Industry, the Super Speedfit Acetal Single Check Valve ensures protection against reversal of flow.

The check valve series is designed for use with liquids, it is not suitable for air or vacuum applications.

Pressures and Temperatures:10 Bar at 20C, 7 Bar at 65C intermittent hot water

SINGLE Check VALVE - Metric Series

Produced(designed for use with liquids, it is not suitable for air and vacuum applications) in the Drinks Dispense Industry, the Super Speedfit Acetal Single Check Valve ensures protection against reversal of flow.

Pressures and Temperatures:10 Bar at 20C, 7 Bar at 65C intermittent hot water


DOUBLE Check VALVE

Double Check Valves Series(valve can be mounted in any position) A spring-loaded internal check valve is sited either side of the test and an arrow identifies the direction of flow.

Pressures and Temperatures:10 Bar at 20C, 7 Bar at 65C intermittent hot water


Service VALVE - Imperial

Speedfit Valves(valves can also be used for domestic hot and cold water supplies but must only be used with liquids) with ball mechanism ideally suited to provide a temporary shut-off facility in a drinks dispense situation.

Pressures and Temperatures:10 Bar at 20C, 7 Bar at 65C intermittent hot water


Service VALVE - Metric

Service Valves(valves can also be used for domestic hot and cold water supplies) for a fast installation ideally suited to provide a temporary shut-off facility in a drinks dispense situation.

Pressures and Temperatures:10 Bar at 20C, 7 Bar at 65C intermittent hot water

Acetal

Stop

Valves

ACETAL ANGLE Stop Valve

The Push-fit technology valves are for use with potable water.

Angle Stop Valves by John Guest are manufactured in Acetal with EPDM 'O' Rings. They incorporate a single check valve and a 1/4 turn chromium plated ball valve. The Valves are Not! suitable for air or inert gases.

Pressures and Temperatures:12 Bar at 20C, 6 Bar at 65C

ACETAL ANGLE Stop Valve

This Valves incorporate a single check valve and a 1/4 turn chromium plated ball valve.

Pressures and Temperatures:12 Bar at 20C, 6 Bar at 65C

ACETAL ELBOW Stop Valve

The Series Elbow Stop Valve has an acetal body and is fitted wth EPDM seals and a brass nut.

Valve are Suitable for applications in the Drinks Dispense and Pure Water industries.

Pressures and Temperatures:12 Bar at 20C, 7 Bar at 65C

Angle

Stop - Adaptor

Valves

ANGLE STOP ADAPTOR VALVE

The ASVPP range is offered in white polypropylene with food grade EPDM o-rings and 1/4 turn chrome plated ball valve. The Push-fit technology valve connects between your valve and riser, to the main water supply line, for applications in Reverse Osmosis, Filtration systems, Automatic and many more.

ANGLE STOP ADAPTOR VALVE (CONVERSION THREAD)

The ASVPP range is offered in white polypropylene with food grade EPDM o-rings and 1/4 turn chrome plated ball valve. The valve connects between your valve and riser, to the main water supply line, for many applications in Reverse Osmosis, Filtration systems and more. The conversion adaptor can be threaded to either side of the valve to make configurations of 1/2" x 1/2" NPS or 3/8" x 3/8" Compression.

Other Valves Manufacturers & Suppliers:

Acetal and polypropylene Valves by "JG"

"EVAL" Tanks, Control and Marine Valves.htm

"RM - 69" - Split-up and Non-return Valves

Ball Valves - "Forespar"

"Marinetech" - Marine/Ball Valves